Replacement Jonell JPMP 336-10AB Liquid Filter Cartridge/ 36-Inch PP Cartridge

Selecting a JPMP 336-10AB replacement starts with the installed cartridge, rather than the model prefix alone. A 36-inch polypropylene filter may share a nominal length with another element while using a different sealing arrangement, end adapter or support structure.

Our JPMP 336-10AB replacement cartridge offering is intended for compatible liquid filtration duties requiring pleated PP media. The selection process focuses on the details that determine fit and filtration performance: overall dimensions, open-end geometry, gasket contact surfaces and the required particle-removal grade.

Double-open-end cartridges and O-ring-connected elements seal differently inside a housing. A filter with the wrong end configuration can allow liquid to bypass the media even when its nominal dimensions appear suitable.

For an accurate comparison, provide the full original code, photographs of both ends and the measured cartridge length. Include the liquid type, operating temperature, flow rate and desired micron rating so the replacement specification can be reviewed against the actual duty.

Application

Oil & Gas Process Filtration

• Typical Applications: Condensate transfer, amine and glycol circulation, lubrication supply, and selected process-liquid polishing.

• Operating Environment: Oil production, natural gas treatment, and refinery support operations using matching 40-inch cartridge vessels.

Chemical and Petrochemical Production

• Typical Applications: Petrochemical processing lines, bulk chemical loading stations, specialty chemical manufacturing, pre-storage/dispatch filtration, as well as coatings, inks, dyes, and adhesive production.

• Filter Media: 40-inch pleated polypropylene cartridges suitable for continuous filtration of compatible chemical streams, solvents, acids, alkalis, and bulk process liquids.

Centralized Industrial Water Systems

• Typical Applications: Process-water distribution, RO (reverse osmosis) pretreatment, injection-water preparation, cooling-water side-stream treatment, and industrial wastewater polishing.

• Selection Factors: Designed for single- or multi-cartridge vessels; selection should consider total flow, available pressure, and incoming solids concentration alongside the micron rating.

Power Generation and Plant Services

• Typical Applications: Cooling-water treatment, service-water polishing, compatible lubrication-oil conditioning, and liquid-fuel treatment.

• Precautions: For hydraulic control service, verify that the selected cartridge meets equipment cleanliness, efficiency, and mechanical requirements.

Food and Beverage Facility Utilities

• Typical Applications: Suspended-solids removal from utility water and compatible support liquids in large food-processing and beverage-manufacturing facilities (incoming-water pretreatment, centralized equipment-service water, and non-product-contact cleaning circuits).

Continuous Manufacturing Operations

• Typical Applications: Centralized circulating-fluid treatment, bulk liquid polishing, textile finishing liquids, compatible coating formulations, and manufacturing-water systems.

• Evaluation Points: Service-life expectations should be assessed using actual flow, contamination loading, and filter-change criteria.